A chainsaw should have a sharpening tool, to do the work properly and quickly. The pile of shavings on the left is from a sharp chain, whereas the more dust-like pieces on the right are cut from a dull saw. Place the chainsaw bar with the Chain Attached is a Vice and Then Tighten the Vice. Make sure to not press the chain in the vice, as it needs to be able to move freely on the bar. Is sharpen a chainsaw essential?The best way to hold the file is to hold firmly with 1 hand on the handle, and the other hand lightly resting on the other end of the file. On each cutting tooth, there is a small line on the top of the tooth that is parallel to the cutting edge. It is necessary to hold the file parallel to the marks. Place the file in the notch and apply little pressure to cut the edge. It is important to apply pressure on both the back of the tooth and towards the top of the tooth because that is the part that is in cutting contact with the wood. Slowly Push the File From the Inside of the Tooth to the Outside of the Tooth. How to Push the File from the Inside of the Tooth to the Outside of the Tooth?Make some pressure to speed on the file and repeat this process 3 times per tooth. By sharpening every other tooth, you will sharpen all of the teeth facing one way, then once one side has been sharpened, go back through and sharpen the teeth facing the other direction. This will ensure that the same sharpening orientation was used on each tooth. Have a look on all the tooth is sharpened or not it not sharpen first sharpen it and do your work. It is important to inspect each tooth to make sure that each one is sharp and consistent. Once the Chain Has Been Sharpened, Remove the Bar From the Vice, and You Are Ready to Go and Work More.
0 Comments
Leave a Reply. |
AuthorEvery field possesses its own equipments, and also wood working is actually no various. Any kind of craftsman recognizes that the appropriate tool for the task is actually essential in producing a quality final product in a prompt manner. |